how to use/create the //gmspeed command?
Posted: Sat Apr 22, 2006 7:05 am
So.. there is any way I could do that?
L2J Server
L2J Server Discussion Board
https://l2jserver.com/forum/
how to use/create the //gmspeed command?
Page 1 of 1
Posted: Sat Apr 22, 2006 10:34 am
i modified nightmarish tattoo for gm, i now have speed 750.
Posted: Sat Apr 22, 2006 2:16 pm
That's a good idea, I'll do that too... thanks for sharing 
Posted: Sat Apr 22, 2006 6:16 pm
np, my value is at 3.30 if i remember correct 
Posted: Sat Apr 22, 2006 6:24 pm
Add the skill 7029 to your self
Posted: Sat Apr 22, 2006 7:04 pm
modify super haste
i've made a nice one =D
i've made a nice one =D
Code: Select all
<skill id="7029" levels="4" name="Super Haste">
<set name="power" val="0.0"/>
<set name="target" val="TARGET_SELF"/>
<set name="skillType" val="CONT"/>
<set name="operateType" val="OP_TOGGLE"/>
<set name="castRange" val="-1"/>
<!-- Done by dagnarth -->
<table name="#Tab-runSpd"> 1.2 3 5 6.5 </table>
<table name="#Tab-pAtk"> 1 2 25 100 </table>
<table name="#Tab-mAtk"> 1 2 25 100 </table>
<table name="#Tab-rCrit"> 1 2 2.5 6 </table>
<table name="#Tab-pDef"> 1 2 25 100 </table>
<table name="#Tab-mDef"> 1 2 25 100 </table>
<table name="#Tab-mAtkSpd"> 1 1.5 2 3.5 </table>
<table name="#Tab-pAtkSpd"> 1 1.5 2 3.5 </table>
<table name="#Tab-mReuse"> 1 2 4 30 </table>
<table name="#Tab-rEvas"> 1 1.5 2 3.5 </table>
<table name="#Tab-maxHp"> 1 1.5 2 3.5 </table>
<table name="#Tab-maxMp"> 1 1.5 2 3.5 </table>
<table name="#Weight"> 50 100 500 5000 </table>
<table name="#acc"> 1 1.2 1.5 3 </table>
<table name="#Tab-regHp"> 3 5 10 20 </table>
<table name="#Tab-regMp"> 3 5 10 20 </table>
<for>
<effect name="Buff" time="144000" count="1" val="0">
<mul order='0x50' stat='runSpd' val="#Tab-runSpd"/>
<mul order='0x50' stat='pAtk' val="#Tab-pAtk"/>
<mul order='0x50' stat='mAtk' val="#Tab-mAtk"/>
<mul order='0x50' stat='pDef' val="#Tab-pDef"/>
<mul order='0x50' stat='mDef' val="#Tab-mDef"/>
<mul order='0x50' stat='rCrit' val="#Tab-rCrit"/>
<mul order='0x50' stat='mAtkSpd' val="#Tab-mAtkSpd"/>
<mul order='0x50' stat='pAtkSpd' val="#Tab-pAtkSpd"/>
<div order='0x50' stat='mReuse' val="#Tab-mReuse"/>
<mul order='0x50' stat='rEvas' val="#Tab-rEvas"/>
<mul order='0x50' stat='maxHp' val="#Tab-maxHp"/>
<mul order='0x50' stat='maxMp' val="#Tab-maxMp"/>
<mul order='0x50' stat='maxLoad' val="#Weight" />
<mul order='0x50' stat='accCombat' val="#acc" />
<mul order='0x50' stat='regHp' val="#Tab-regHp"/>
<mul order='0x50' stat='regMp' val="#Tab-regMp"/>
</effect>
</for>
</skill>